Skip to Content

How to Fix a Clogged Washer Drain

There are several ways to fix a plugged washer drain. Here are the symptoms and possible solutions:


If the water in your washing machine is pooling at the bottom, you probably have a clogged drain pipe. This can occur for a variety of reasons, and the best way to solve the problem is to locate the clog and remove it. To perform this task, you must first remove the drain pipe from your washing machine. If you don’t know where it is, you can use a screwdriver or a drain-snake to remove it.

If you notice a leaky washer drain pipe, you should immediately stop the cycle and call a plumber. A plumber can inspect your sewage lines and determine the exact cause of the problem. If it takes more than a minute for the water to overflow, you may have a more serious problem. If the water is taking longer than normal to overflow, you may have inadequately sized drainpipes or kinked hoses.

The first step is to remove the trap and locate the drain hose. Once you have located the drain, you can insert the drain snake into the pipe by using the handle. Turn the handle clockwise to push the snake deeper into the pipe. When the snake reaches the blockage, turn it to release it. After using the drain snake, you must clean the lint trap and drain hose. Alternatively, you can try using chemical cleaner to break up any sludge or debris in the pipe.

Another common cause of a clogged washer drain is a failing drain pump. This can occur on both traditional top load and front-load machines. While the pump can fail due to wear and tear, it is typically a mechanical problem. If you can fix the pump, it will last longer and work better than replacing it. It is often cheaper to repair than replace the drain pump. In some cases, you may have to replace the pump instead.

The clog can also occur further down the drain hose. To solve this problem, you can try using hot water and a chemical drain cleaner. If this doesn’t work, you can use a heavy-duty drain auger or plumbing snake. Be sure to unplug the washing machine before proceeding with this task, as it can damage the hoses. If the problem persists, it is best to call a professional plumber.


The most basic fix for a clogged washing machine drain is to remove the hose from the drain pipe. The hose is located behind or under the machine. You must detach the hose from the machine’s drain pipe to access it. Disconnect the drain hose from the machine, and insert a drain snake into the pipe. Push it into the drain until it meets resistance, and then turn the handle clockwise until it reaches the clogged area. If the drain snake is unsuccessful, check to see if any other piece of debris is clogging the pipe.

A small hand-operated or power drain snake can be used to remove a clog from a standpipe. However, if the washing machine is slow draining, the clog may be deeper in the drainpipe, past the drain trap. To clear this obstruction, you may need a medium-sized drain snake. Pouring hot water down the drainpipe can also remove the clog from a cleanout.

A clogged washing machine drain can cause a washing machine to overflow. It is possible to unclog this drain yourself, but it is not recommended unless you’re an experienced plumber. If you can’t do it yourself, you might want to call a plumber in Sugar Land, Texas to assess the problem and recommend a solution. The following are some of the easiest fixes for a clogged washer drain.

The most common solution for a clogged washing machine drain is to empty it. The hose is usually located behind the machine. To unclog the drain, you can attach a hose to it and push it inside. Make sure to identify the drain pipe from the hot and cold water lines. The hot and cold water lines should be smaller than the drain pipe. Some machines will have blue and red colored lines.

One of the most effective fixes for a clogged washing machine drain involves the use of enzymes. Enzymes are used to clean the pipes, and they need to be applied to the pipes three days in a row. Using enzymes will help to remove the clog and prevent the washing machine from overflowing. This simple fix will save you money and the hassle of calling a plumber to unclog the drain.


If your washing machine is not draining properly, you may need to fix it to prevent water damage. A clogged drain hose carries dirty water away when the machine drains, and it connects to a nearby drain. Sometimes, the drain hose becomes twisted or clogged from the inside. If you can’t clear the drain hose on your own, contact a plumber. If the clog persists, you may need to replace the drain hose.

To clear a clogged drain, use a drain snake. These tools are usually available at hardware stores and require you to disassemble the washer and disconnect the water connection. You should then remove the drain hose and inspect it for any obstructions. If you don’t find any obstructions, you may need to use a drain cleaner or a long object to flush out the blockage. Once you’ve cleared the clog, you can continue to use your washer.

If you can’t clear the clog yourself, consider renting a drain snake from a tool rental store. Although most people do not own one of these tools, they can rent them for a small fee. Another option is to purchase a clean-out fitting and plunge the drain. This will flush out the clog and ensure the drainage system is free of debris. After the drain snake is cleared, you can try using a chemical drain cleaner or a heavy-duty drain auger to remove any remaining clogs.

Changing the drive belt can also fix the clogged washer drain problem. Replace the drive belt if the clogged pump isn’t making a sound. You can get hose clamps at a hardware store. If you’re not sure which pump is responsible for the clogged drain, you can use a manual illustration to help you figure it out. If you’re still not satisfied with the results, call a professional to help you.

A clogged washer drain can be caused by a broken filter or the hose that connects the machine to the drain. Generally, this problem is mechanical. If the hose isn’t working properly, a repair may be necessary instead of replacing the drain pump. It’s easy to fix a clogged washer drain if you know what to look for and how to repair it. If the filter is not the cause, the clogged drain is the culprit.


To avoid a clogged washer drain, you should know what to do before it happens. Before you can do anything else, you must first turn on the washing machine’s drain cycle. Then, check for any overflow or spills. If you find any, the clog might be further down the drainpipe. If you are unable to locate the clog, you can always use a power auger to clear it. The auger uses a heavy-duty wire cable to push out the clog.

If you have a washer with a faulty water level control, the problem might be with this part of the machine. If the water level control has corroded, you will need to replace it. Other problems may include a water pump or drive belt. If you suspect a mechanical problem, contact a professional for an inspection. If you do not have the time or expertise to diagnose the problem yourself, here are some things to keep in mind.

If you suspect that your washing machine’s drain pipe is clogged, turn off the machine before doing any of these repairs. Once the machine is off, locate the hose that leads to the drain. It should be black and connected to a floor drain, laundry sink, or standpipe. If the hose is connected to a PVC pipe, look for it. Using a flashlight, check the inside of the discharge connector. Wearing rubber gloves, poke around with your fingertip to pull out any sludge-like debris.

A clogged washing machine drain is a major nuisance. Not only will the water spill out, but it could also damage property. A clogged washer drain will also overflow causing flooding in your laundry room. To avoid such a mess, you should invest in a lint catcher. It is adjustable to fit inside most hoses. When it becomes clogged, you can use hot water or a chemical drain cleaner to clear it.