Skip to Content

Main Sewer Line Clog

If you notice gurgling sounds from your sink, you may have a backed up main sewer line. In addition, clogged drains can cause water to run throughout your house, or just one area. The most common clogging sources include feminine hygiene products, paper towels, and certain types of toilet paper. Here are some tips to help you prevent sewer line clogs and get back to normal draining as quickly as possible.


A main sewer line clog can cause several problems in a home, including sewage odors and slow draining fixtures. These are all symptoms of a larger clog and will require the services of a plumber to clear the line. A clogged main sewer line is relatively easy to fix for an experienced plumber. Listed below are some of the most common signs of a clogged main sewer line.

A clogged main sewer line can cause a significant amount of property damage. While the clog itself isn’t always visible, the sewage that is backing up can cause considerable damage to your home and property. A video inspection of the sewer line will determine what’s causing the clog and what the best course of action is. If you see these symptoms, contact a plumber immediately to have the problem fixed.

The first symptom is a foul odor. Sewage odors are unmistakable, and they aren’t a good sign. Whether it’s inside the home or outside, sewage smells are a sure sign of a clogged main sewer line. Also, excessive drainage from the clean-out area should be another sign. The smell of sewage may also indicate a clogged main sewer line.


Some of the most common causes of main sewer line clogs are items flushed down the toilet, grease, and fat. These items are solid in your toilet, but they don’t dissolve in hot water, so they will solidify in your main sewer line. Also, avoid flushing any food or oil down the drain, and never put anything down the garbage disposal. Older pipes are made from clay or cast iron, which can crack or collapse due to deterioration.

Shifting soil can also cause a clog. This problem can be caused by increased foot traffic or heavy construction vehicles. Shifting soil can cause corrosion of your sewer pipe, causing leaks and collapse. Even if the pipe is still in good condition, it can sag or break due to repeated blockages or shifting ground. Regardless of the root cause of a clog, it’s always best to contact an experienced plumber as soon as possible.

A clogged main sewer line is a serious problem. If the line is damaged, water can back up into your home, causing damage. Fortunately, it is easy to fix, and there are a variety of ways to clean up the mess. If you’re not sure what’s causing the problem, you can call a plumber who can perform a sewer camera inspection. However, be warned: if you wait for the clog to clear, the problem is likely to recur.

Cost of repair

The average cost for a main sewer line clog repair is $150. The plumber’s fees may range from $250 to $800, depending on the severity of the clog. For larger blockages, a plumber may use hydro jetting or a snake to clear the clog. The cost varies depending on how far the blockage is, the difficulty of the location and the amount of labor required. If you have bad smells or sluggish drainage, it is most likely a secondary sewer line problem. If you notice any of these signs, it’s best to get a plumber to solve the problem as quickly as possible.

The cost of a main sewer line clog repair can vary widely depending on how extensive the clog is and where it’s located. If the plumber has to dig up concrete slabs, for example, the cost could increase substantially. Some plumbers charge $150 an hour for labor and equipment. Hydro jetting is best for mild to moderate clogs, and may cost you between $300 and $650.

In some cases, the main line clog is the homeowner’s responsibility. If the problem is between the home and the main line, the city will send a contractor out to inspect the property. However, if multiple toilets or fixtures are clogged, it is likely that the main sewer line is the cause of the problem. If a main sewer line clog causes multiple clogged toilets, call a plumber and have the problem diagnosed before it gets worse.


A clog in the main sewer line can have severe ramifications for your home. Often, the clog goes undetected, resulting in extensive damage. Sewage backup, which involves toxic waste, can be a health hazard for you and your entire family. As a result, it is vital to take the proper precautions. Listed below are some of the things you need to do to prevent a clog in the main sewer line.

If you have a large tree or a densely-packed area of soil, you may need to have your drain pipe inspected for damage or roots. Tree roots can clog sewer pipes if they grow into them and enter them through pipe joints. A sewer company or certified plumber can examine your main sewer line with a camera to identify the source of the clog and make a permanent fix. This will prevent future clogs and save you the trouble and cost of having to call a plumber again.

If your main sewer line clog is the result of a large tree root infestation, you should contact a local tree service and arrange for a tree surgeon to clear the clog. In the meantime, you can follow the five steps listed above to prevent a clog from occurring. If a clog occurs in the main line, it is imperative to call a plumber immediately. By following these steps, you can ensure your main sewer line is in good working order and prevent future problems.

Tree roots

If your drains seem to run slowly, chances are that tree roots are causing the problem. This problem often begins when a tree’s roots block the line, which can cause a sewer line clog. You can quickly resolve the clog by using a plumber’s snake, but if the problem goes unattended, it can lead to costly water damage and burst pipes. You can also check for collapsed pipes in your yard.

It’s important to know that tree roots can enter your sewer line through small cracks and pipe joints. Once they get inside, they’ll quickly expand and block your pipe. The result is a backed-up drain. If you’re not able to prevent the root growth, you’ll have to hire a plumber to clean your sewer line. This is a highly unhygienic and expensive problem that can be avoided by following the steps mentioned in this article.

The first step to preventing tree roots from blocking your sewer line is to identify them. Tree roots grow into pipes because they need water and nutrients. The water in sewer pipes is a great source of both nutrients for plants, and they’ll expand to fill any crack or opening in the pipe. If you can see roots, it may be time to call a plumber. The sooner you take action, the better. You’ll soon realize that your sewer lines are backed up with sewage.


In order to clear a main sewer line clog, you will need a professional grade plumbing snake. You can purchase one from a hardware store or rent a professional grade snake from a plumbing service. If you’re not sure which snake to use, read on for some helpful tips. If you can’t clear the clog yourself, you may need to call a plumber. However, you can also do it yourself and keep these tips in mind for future emergencies.

When the drains are working properly, they will flow quickly. But if the line is clogged, it will drain slowly or halt completely. Most sewer line clogs don’t actually block the entire pipe. Instead, they are caused by debris that builds up over time, making it harder for waste to move through. Snaking your main sewer line is the most effective way to clear a clog in the main sewer.

One way to determine if you have a clogged main sewer line is to unscrew the cap on the clean-out at the end of the line. If there is no waste on the clean-out pipe, you can proceed with the rest of the procedure. If water is still in the clean-out pipe, you’re likely dealing with a main sewer line clog. Snaking can help you identify the problem before it affects your entire home.