Skip to Content

How to Unclog a Toilet That is Not Draining

Your toilet isn’t draining properly, but don’t despair! There are a couple of common causes of clogged toilets and common ways to fix them. Here are a few of them:

Common causes of clogged toilets

If your toilet is not draining, there are a few common causes. First of all, do not flush any feminine products down the toilet. These items expand when they absorb water and take longer to break down in the sewer system. It is also important to never flush cleaning wipes or paper towels down the toilet. They may clump together and cause a clog. The best solution is to remove these items before flushing. If you are unsure how to avoid these causes of clogged toilets, call a plumbing professional.

Clogged sewer lines are the most common cause of clogged toilets. Sewer lines lead waste from your home’s plumbing system to a septic tank or municipal sewage removal lines. In some cases, broken sewer pipes can also be the culprits. Broken pipes can also cause clogged toilets. If you notice that your toilet is constantly clogged, you should have it checked by a professional.

The next most common cause of clogged toilets is toilet paper. Many people accidentally flush too much toilet paper, which can clog the toilet. In addition to folding the toilet paper, make sure it fits properly in the trap. Plumbers recommend using a plunger to clear the clog. If this does not work, you can hire a plumber to fix the problem. If you can’t figure out what caused your toilet to stop draining, you can search online or call a local plumbing company to fix it.

Another cause of clogged toilets is hard water. If you live in a part of the world where hard water is prevalent, it will calcify inside drain pipes and narrow the gap between water and waste. This will increase the risk of your toilet clogging over time. A professional plumber can fix this issue by flushing the entire system or installing a water softener. Then, your toilet will finally be flushing and draining properly.

Using too much toilet tissue is another common cause of clogged toilets. Many people use more than necessary. However, the more toilet tissue you flush, the more likely it is to clog. Additionally, toilet paper has become increasingly fancy over the years, with multi-ply construction. This material is difficult to remove and prevents waste from flowing properly. The best solution is to consult a plumbing professional to fix your clogged toilet once and for all.

Common methods to unclog a clogged toilet

A few common ways to unclog a toilet that is not draining include using a plunger. You can find a plunger at most hardware stores. You can insert the plunger into the drain and let it run for about 15 seconds. You can also use a wire hanger. Wrap the wire around your index finger and insert it into the toilet drain opening. This will create pressure and help the clog move.

Another common way to unclog a toilet is to mix baking soda with vinegar and press down on the clog with a wire hanger. It will fizz up and dissolve over a few minutes. Then, you can try flushing again. Another common method is to use an enzyme waste removal tool. Enzymes are available in most home improvement stores and grocery stores.

Enzyme waste removal products can also be used to dissolve waste materials. The enzymes in the product won’t harm your pipes but can cause a clog if they’re stuck on solid objects. Be sure to read the instructions on the product’s label before using it. When using an enzyme product, be sure to back out the hook if it feels like it is being forced.

A baking soda and vinegar mixture will create bubbles inside the toilet bowl. This reaction will loosen the materials blocking the toilet, allowing the water to flow freely. A plumbing snake is another method you can try. This is a flexible wire that is readily available in many households. You can try this method to unclog a clogged toilet without hiring a plumber. There are many DIY solutions available, but this method has the highest success rate.

If the above methods don’t work, you can try adding a little liquid dishwashing soap to the water. The chemical will break up the blockage and lubricate the pipes. The liquid will unclog a toilet without a plunger. This method is effective if you have a lot of hot water in the toilet. After 20 minutes, you should see some results.

Using a plunger to unclog a clogged toilet

A plunger works by creating suction to unclog a sluggish clog in your toilet. If you can’t use a plunger, try pouring hot water over the clog. Be sure not to boil the water, since it can crack the porcelain. Instead, pour hot water over the clog and let it sit for a few minutes. Once the water level drops, use a plunger.

If this doesn’t work, you can try using a wet/dry vacuum to unclog a sluggish toilet. You’ll need to put rubber gloves on and insert the hose into the toilet. Then, wrap a towel around the hose to create suction. This should pull the clog out of the drain and into the toilet bowl. Make sure to clean the vacuum afterward.

When using a plunger to unclog sluggish toilets, always use downward pressure. Do not release the plunger pressure as this will cause massive air bubbles. The next step is to remove the toilet lid. Then, you should see a round rubber trap door (also known as the flapper) in the center of the bottom of the tank. If you can see the flapper in the center of the tank bottom, you should be able to use a plunger to push debris down.

Another method to clear a clog is to pour hot water into the toilet bowl. The resulting water should soften the clog. This method will work best if the toilet bowl is not full. This method requires a water supply and should be given at least 10 to 15 minutes to be effective. This method may require you to flush the toilet once or twice to get a good chance of getting the clog out.

Using an auger to unclog a clogged toilet

If your toilet is clogged, use an auger to force the clog out. To do this, hold the handle of the auger and rotate it in the opposite direction. While cranking, make sure you do not push the handle too far back. This can cause the auger head to become tangled in the trap and hard to remove. In addition, continued cranking can cause the auger to crack.

If the snaking does not work, consider using a toilet auger. They are inexpensive and can be purchased at most hardware stores. Before you begin, make sure that the handle pipe of the auger is facing the drain. Also, ensure that there is at least four to six inches of cable between the end of the handle pipe and the drain. Once the cable is inserted, use extra pressure to pierce the clog and allow the water to flow out.

Firstly, make sure that you have a large bucket nearby. You will need a waterproof container. Then, you will need to place the auger into the bucket. The cable should be pointing towards the drain at the back. Then, you should turn the handle counterclockwise until you feel resistance in the cable. As the cable rotates, the auger head will catch and break the clog. Once it has broken the clog, you should have a flush.

The auger works by pushing the clogged part of the toilet deeper into the piping system. The water will make a swooshing sound. Then, you will use the auger to push the clog out. Using an auger to unclog a clogged toilet is an effective way to unclog a toilet. Always make sure to wear gloves when working around plumbing.

Using an auger to unclog the toilet can be a good way to make sure the entire pipe is clear. However, you must be careful not to cut yourself while using it because it can cause splashing water. Always remember to wear protective gear when using an auger, because it can cause damage to your bathroom. Keep in mind that it is recommended to use the auger only when it is a certain way.