Skip to Content

Installing Drain Pipe in Yard

To install drain pipe in your yard, you must first determine the slope. Determine the slope of your yard by placing stakes in the ground. To make it easier to locate your drain line, you can attach a string to a stake and stretch it to another stake. Center the bubble on your line level, and measure from one stake to the next. Divide this measurement by the distance between stakes to find the slope of your yard drain pipe. If the slope is not flat, you must dig deeper in the lower portion of the trench.

French drain system

Before installing a French drainage system in your yard, you must be aware of all the requirements and regulations pertaining to digging. French drains require trenches several feet wide and several feet deep, so you should be prepared to work around landscaped areas. For easy installation, prefabricated French drainage systems are available, which cost more but require less labor. Besides, they are able to cover larger areas than typical drainpipes.

You should choose a trench that is 1.5% to 2% sloped to reduce the amount of water that is able to collect in the trench. If you don’t have such a slope, you can also install a sand-filled trench with slotted pipe conveyance to handle standing water. However, you need to empty the pipe regularly to prevent water from backing up and flooding your yard. Nevertheless, it’s worth taking the time to install a French drain system in your yard.

A French drain system is a system that collects rainwater and transports it to low-lying areas. The drainage pipe is wide and perforated with holes, so that it can easily collect excess water and make its way to low-lying areas. Gravity helps in French drain installation, because it allows water to flow easily through gravel or stones than through dense soil. This system also prevents erosion and other problems caused by excess water.

Corrugated PVC pipe

When installing a corrugated PVC drain pipe, you need to first choose a location with a downward slope, so that water will flow away from your house’s foundation. Once you’ve selected your spot, dig a trench that’s at least six inches wide and 24 inches deep. If the soil is loose or loosening, use wood to compact it and add gravel. Make sure that the gravel is at least two inches thick.

When installing drain pipe in your yard, you can either use solid white PVC piping, or you can use corrugated PVC piping. Both materials are good, but one type is better than the other. PVC pipe is easier to maintain than corrugated pipe, and it is also cheaper than other types of piping. Corrugated pipe is less flexible than PVC pipe, and it needs fittings and PVC glue to bend properly.

One of the biggest advantages of using corrugated PVC pipe is that it can be used to bend 90-degree bends in tight areas. It’s also lightweight and easy to work with. It’s important to note that corrugated PVC pipe isn’t recommended for a shady area, since roots can grow into it. Also, sediment can collect in the corrugated ridges and slow the water flow. This could lead to a 100% blockage.

Dry wells

Dry wells are a great way to capture water runoff from large areas in your yard. These pipes drain the water slowly into the ground. Installing drain pipe in yard for dry wells is an easy DIY project or a relatively quick job for a landscaping contractor. To ensure a water-free yard, follow these instructions. If you have trouble installing drain pipe in yard for dry wells, consider hiring a professional to do it for you.

You will need to install a drainage pipe that slopes toward the dry well by about one-fourth inch for each foot of run. Once the pipe is in place, use a 2-foot level to check the soil level under the pipe. You can make the pipe level by adding or removing soil. Then attach the adaptor to the downspout using stainless steel sheet metal screws. If the pipe is too long, you can backfill the area around it.

When installing a dry well, consider the location and the size of the dry well. Some are small and fill with gravel or rock. Others have larger dry wells and use them to alleviate flooding in outdoor areas. No matter what size dry well you choose, it is important to consider how much space it will require and what type of materials you want to use for fill. If you don’t have any land available, you can build a dry well on a small piece of land.

Tree roots

If you are planning to install a drain pipe in your yard, you must consider the root situation. Tree roots can wreak havoc on your plumbing and sewer lines, as well as on the front yard and the foundation of your home. Tree root obstruction is a major problem, and if you are unable to notice its symptoms, you could be in for a lot of trouble. In order to prevent future problems, you should call a professional plumber to handle the problem.

There are several ways to remove tree roots, including using root cutting machines and chemicals. In some cases, an apprentice can be left to glue pieces of pipe together, which will allow the tree’s root system to get inside. These methods may work temporarily, but they can also cause more damage to your pipe system and yard. For best results, you should use a permanent solution. If you’ve tried to remove tree roots, you’ll find that the problem comes back. You should consider removing tree roots in order to avoid the unpleasant smell that results from clogged sewer pipes.

The best way to prevent tree root invasion is to install a preventive growth barrier. This barrier is a wall-like structure that prevents roots from growing into the drain pipe. It can be made from copper, wood, or sulfate. Regardless of the type of barrier, it’s recommended to install a preventive growth barrier in the yard before planting any trees. Using these barriers will also promote stronger soil, which is essential for tree roots. Tree roots prefer a loose, porous soil and are not able to travel through compacted soil. You can also firm up soft soil by introducing moss, compost, or mulch to the area.

Cost

There are two methods of drainage in your yard: a catch basin or a storm sewer. Both are relatively cheap and easy to install, but they do require some manpower. Depending on their size, concrete catch basins cost about $2,200 to $3,000, and they are best suited for older sewer systems. They also separate contaminants and divert water to a dry well. The first option costs about $80 to $180 per foot.

A drainage trench requires excavating the yard and laying the right size of pipe and slope. You will need a soil separator and filter fabric to line the trench. Once the trench is installed, you’ll need to cover it with gravel or stones for aesthetic purposes. If you’re looking to save money, consider hiring a landscaper or day laborer to perform the job. Make sure to get three estimates, and make sure the contractor is licensed, insured, and has at least five years of experience.

If you want to install a French drain, you’ll need to dig a trench that’s deep enough to be covered with grass. The soil and gravel will take up about four inches of the trench. Grass is also more expensive than solid pipe, so you need to account for this before getting started. Depending on the complexity of the project, you may need to get a professional landscaper to complete the job for you.

Location

The best place to install a drain pipe in your yard depends on your specific needs. Consider how much water you anticipate in your yard and the surrounding terrain, including elevation and soil type. Consult with a landscaper or drainage expert to choose the best location for your drain pipe. Some design tips are listed below. French drains are commonly placed along property lines and work best in sandy soil. In addition, the installer will determine the best drainage solution for your yard and property.

The main drain pipe is 4 inches in diameter, and may be made of ABS plastic, PVC, clay, or cast iron. It runs under the foundation slab of your home. Unless you are repairing the foundation, you may not even notice your drain pipe. The drain pipe ends at a municipal sewer main, and slopes downward to allow for flow of waste. Most cities and sewer districts own the main pipe, so it’s important to know where yours is.

Most homeowners are unaware of their sewer line access points, and it’s important to know exactly where these are so you can fix any problem quickly. In most cases, the access point is near the foundation of a house or at the street where the sewer line joins the municipal sewer system. While these access points are relatively easy to identify, they can be covered by overgrown landscaping or objects close to the house. In rare cases, it may be buried.