After introducing Kitec piping to Canada in 1995, it has been known to cause a lot of problems for homeowners. These pipes often spontaneously burst, and the zinc content in the fittings was a problem. People have spent a lot of money trying to repair the water damage and fix the structural deficiencies and electrical problems. But what is the best way to deal with these problems? Read on to find out how you can avoid them.
Kitec piping was introduced to Canada in 1995
Before it was recalled in 2005, Kitec pipes were introduced to the US market. They were sold as easy to install and affordable plumbing systems, but they failed to live up to their claims and caused costly water damage for homeowners. In 2011, a class action lawsuit was filed by victims of the pipes’ leaks for up to $125 million USD. The settlement is the largest of its kind in Canada. The lawsuit seeks compensation for victims whose pipes failed and were not repaired in time.
$4.99 Per Minute
Kitec plumbing is made of aluminum sandwiched between two layers of plastic. KITEC fittings are marked with ‘Kitec’ or ‘KTC’, indicating their manufacture. Introduced to Canada in 1995, Kitec piping was introduced to Canada as an alternative to traditional copper piping. Unlike copper, it was easy to install in virtually any space and cost less to manufacture. Although sold under various brand names, Kitec is the most commonly recognized name for the piping system. Since a number of recalls, Kitec has fallen out of favor.
The lawsuits alleging that Kitec piping is defective have a high chance of causing a flood. Although the company is still denying any fault with the plumbing system, it agreed to a $125 million settlement to compensate victims. The fund is intended to cover the cost of repairs when the Kitec plumbing system fails. The fund is also available to homeowners with a working system. The settlement fund has a limit of $125 million, so the amount awarded is unlikely to be much higher.
Kitec fittings contained high levels of zinc
The manufacturer of Kitec pipes, IPEX Inc., has been sued in a class-action lawsuit over their defective products. These fittings contain high levels of zinc and can dezincate and completely fail, leaving homeowners with a burst pipe and major water damage. Zinc leaches from brass, and the combination of the metal and water can cause the fittings to corrode, leading to failure.
The failure rates from Kitec plumbing may be high, due to excessive water pressure and water temperatures that exceed the manufacturer’s rating. Industry experts say the piping will weaken and fail prematurely, and the failure rate will increase over time. The pipes may also burst, causing flooding. The high levels of zinc also cause corrosion and a darkened color, which may lead to blisters and cracking.
A qualified plumber should first identify the product. To do so, the plumber will bore a small hole beneath the sink to insert a flexible arm instrument. Some inspectors may be able to identify the product by its yellow or neon sticker. However, these stickers were applied indiscriminately. Therefore, many homes with Kitec plumbing do not have any of them. If you’re not sure whether your plumbing has Kitec fittings, consult with a plumber or a qualified plumbing contractor.
Despite the lack of scientific evidence to support these claims, the company behind Kitec is still standing by their product. It is an inexpensive alternative to copper piping, but the risks of leakage are too high for consumers. Kitec plumbing and fittings are available at IPEX, Kerr Controls, and WarmRite. A recall is expected soon. Kitec pipes were recalled from the market in North America.
Kitec pipes spontaneously burst
When Kitec pipes spontaneously burst, the plumbing system is likely to fail due to corrosion, which is caused by zinc buildup. The pipes, like their fittings, are made from an aluminum tube that is sandwiched between two layers of plastic. Unfortunately, Kitec piping was popular because of its flexibility. But this pipe has many problems, and zinc clogging is one of the most common causes of the failure. It looks like the zinc is clogging from brass fittings, but it could be a chemical reaction between the aluminum and zinc.
Before you take any action, you should check whether your pipes are made of Kitec. It is also necessary to check for corrosion and defective pressure regulator valves. Although a recall was issued in 2005, many contractors and homeowners continue to install the system. This is why some homes with Kitec plumbing have failed. It’s also important to get your pipes inspected to make sure they’re safe before you move in.
Many home insurers will require you to replace your Kitec pipes if you have them. However, if you have a history of leakage, your insurer may decide to increase your insurance premiums. If your Kitec plumbing has failed, you should contact your insurer as soon as possible. Home insurers may cover the cost of replacing the pipes if you purchase a new policy. You should also remember that most home insurance policies will cover water loss caused by ruptured pipes, overflowing appliances, and more.
Kitec replacement involves re-piping
Re-piping a Kitec system can be an expensive undertaking. If you suspect that your pipes are faulty, you should immediately contact a licensed plumber. It will require re-piping and extensive sheetrock repair. Depending on the size of your home and number of pipes and fittings, you may be entitled to up to $125 million in settlement money. But time is running out to claim your money. If you believe your pipes are not faulty, you can still opt for a new one.
The first step in a Kitec replacement involves identifying which parts of the plumbing system need replacing. Many homes were sold before the recall. If you are not sure whether your home contains Kitec plumbing, you should contact a licensed plumber who can verify this for you. This plumber will also evaluate your plumbing system to determine what immediate repairs you need. He will also be able to tell you how long the replacement process will take, as well as whether there are any interim repairs you should consider.
A full re-pipe can be expensive, but if you can’t afford the costs of a Kitec replacement, you can still get a 100% refund from the company. Claude Boiron, the company that manufactures Kitec plumbing, has committed to paying 100% of the costs of re-piping your home. However, you must register for the settlement by 2020 to claim your share of the $125 million fund.
Class action lawsuit against manufacturer
If you have a defective Kitec plumbing system, you may be eligible to claim a settlement. A North American class action lawsuit against Kitec’s manufacturer, IPEX Inc., was recently settled for $125 million. Although the compensation amount is a large sum, you may be eligible for some of it if your plumbing is defective. It is important to note that you must file your claim by September 30, 2011, in order to receive any compensation.
As stated in the lawsuit, the affected pipes were made of high levels of zinc. This zinc oxide led to premature failure and restricted water flow. The plastic and aluminum layers became weaker over time. When temperatures changed, the piping weakened and eventually ruptured. The defective pipes cost homeowners millions of dollars and left them with water damage, structural deficiencies, and electrical problems. Some even had black mould growing in their home.
This settlement provides compensation for the entire class of cases involving Kitec. The amount is large, with more than $97 million in claims already filed. The Kitec plumbing repair settlement is open to Canadian consumers who have experienced the same problem as those in the U.S. However, it is important to note that the number of eligible plaintiffs is extremely low. A large percentage of eligible claimants did not file claims, making the settlement even more appealing.
Cost to replace
If your house has a yellow sticker on the electrical panel door, it is likely that your home is plagued by Kitec plumbing problems. The yellow sticker indicates that your plumbing is not functioning as a ground or hot water pipe. If you suspect that your plumbing is malfunctioning, you can consult with a plumber and get a personalized quote online. Here are some common problems and how much they cost to replace. Read on to learn more.
Depending on the size of your home, a professional plumber can give you an estimate of the cost to replace your Kitec plumbing. If you do not have any Kitec plumbing in Ontario, you may not be eligible for a class action lawsuit until after January 2020. In this case, you may want to contact a local plumber who specializes in this type of plumbing. The cost to replace a Kitec pipe may be around $8,000 to $10,000. However, the cost will likely be much lower than the damage that flooding can cause.
Because Kitec pipes were made with high amounts of zinc, they became susceptible to corrosion. This happens because the brass and zinc used to manufacture them leech minerals into the water. The result is a buildup of zinc oxide in the pipe. This blockage restricts the flow of water, causing the pipe to fail. Also, the plastic and aluminum layers of the fittings expand and contract with normal temperature changes, resulting in weakened connections. Ultimately, this led to major water damage and structural deficiencies. Additionally, black mould has also been reported in affected homes.