Skip to Content

Your Sink Won’t Drain – Causes and Remedies

Your sink won’t drain. There are many possible reasons why this problem occurs. Here are some possible causes and remedies. First, make sure that the plug is not plugged. If it is, then you may need to reinstall it. If you’ve already replaced the plug, it may also be frozen. In such cases, you should try unplugging the plug. However, this method may not be enough if the problem is in the drain piping.


If your sink is not draining, you’re not alone. There are many ways to fix this issue, and some of them may be more effective than others. Listed below are a few common reasons why your drain is clogged. If you notice that standing water is coming from your sink, first make sure it’s not your garbage disposal. To clear a drain, first try using a plunger to push down the clog. If the obstruction is shallow, you may be able to unclog it by removing it with a pair of rubber gloves.

First, you may have a clogged P trap. The P trap is a two-piece pipe that curves downward. Use a bucket to catch any water that comes out as you undo the P trap. If you can’t unbolt the P trap, you can remove the screw or slip nut. You may need to open the trap using a screwdriver to free it. You can also use a straightened coat hanger to dislodge stuck foods.

Besides blocking the sink, the drain can also cause an unusual smell. The smell will depend on the substance clogging the pipe. If the odor is recurring, it could be a sign of a budding clog. If the odor persists, you should call a plumber right away. If you have a clogged pipe, contact a Seattle plumber today. You can find out more about how to fix a clogged pipe from Best Plumbing.

Besides preventing clogged pipes, clogged drains also pose health risks. Clogged drains can cause dangerous fumes, and plant roots may grow inside the sewer line, posing a threat to your home and health. Additionally, a clogged drain can cause a puddle outside of your home. When the drain is clogged, fruit flies and drain flies can build up and breed inside. This can be harmful to your food.


If your sink is taking a long time to drain, you may have one of several causes. One of the most common causes of slow draining sinks is the buildup of fat, oils, and grease (FOGs). The quickest way to fix this issue is to pour the fat into an empty can and let it cool before disposing of it. FOGs are acceptable for disposal in Ottawa, but if you find that they are causing your sink to drain slowly, it’s time to call a plumber. Another cause of slow draining sinks is deteriorated pipes. They will break down and corrode, and you’ll have to replace them. Alternatively, if you’ve poured something down the drain and it’s still standing, there’s a possibility that a tree root is blocking it. The conventional remedy is to cut

If you can’t find a source of the blockage, the clog could be caused by food scraps or larger objects. Over time, these objects can accumulate inside the drain pipe and completely block it. The resulting backed-up water and smell may be unpleasant. It’s also possible that the clog has been there for a long time. If you can’t locate the source of the problem, the next best step is to replace the drain pipe.

Another major cause of slow draining sinks is sediment buildup. If you’ve had a lot of soap or food accumulated in your pipes, sediment might have built up and stopped draining properly. This sediment can be removed by a plumber, and your pipes will be cleaner than they were before. A plumber will also know what to look for in order to resolve the issue. They won’t charge you more money than necessary, as long as you’re sure that the draining pipe is in good condition.


A clogged sink may be due to a clogged garbage disposal. The grease from a spoon or food may have been poured down the drain, causing it to become clogged. Instead of pouring grease down the sink, pour it into a glass jar and throw it away after it cools down. Make sure to use cold water to flush the pipes, as hot water will cause the grease to become slick and adhere to the pipes.

Boiling water may dissolve a clogged sink quickly, but you should be cautious because boiling water can damage PVC pipes and lead to leaks. Using boiling water should only be used in emergency situations, however. Boiling water should only be used in a drain after waiting at least 10 minutes and is not suitable for use with a toilet. Be sure to keep a container of water nearby while boiling the water.

To unclog a stubborn clog, you should try pouring a mixture of baking soda and vinegar down the drain. Baking soda and vinegar act as an acid and a base, and they will react chemically to dislodge a clog. To make the solution, pour half a cup of baking soda and one-half cup of white vinegar in hot water and let it sit for 15 minutes. You should repeat this procedure several times to remove the clog.

Another natural solution is washing soda. This substance is more alkaline than baking soda, so it is more effective. You should pour boiling water down the drain followed by one or two teaspoons of washing soda. Leave the mixture for about five minutes and check it again. Do not forget to remove any sanitizer residue before pouring boiling water down the drain. And don’t forget to keep the water in the kettle warm as it might burn you!

Check for plug

If your sink doesn’t drain, you need to check for a clog. Before you begin, make sure there is no visible obstruction blocking the drain. This may mean using a flashlight or an unfolded paper clip to see underneath. If you don’t see any obstruction, try unscrewing the plug with a screwdriver. Often, the plug is in the closed position, which is what causes the clog.

If you can’t find the plug, you can use a plunger. It is also a good idea to plug the other side of the sink if you have one. A straightened coat hanger can sometimes dislodge stuck foods. Once you’ve removed the plug, the next step is to check the P-trap for loosening. You can also use a wire drain snake to remove a clog from a sink.

Test to see if clog has been removed

Before attempting to fix your sink, check to see if the garbage disposal has a clog. Sometimes, this may be caused by the disposal overheating. You can reset the garbage disposal by pushing the reset switch on the side or bottom. If the switch doesn’t work, try pouring boiling water down the drain. Be sure to use a non-corrosive chemical drain opener, such as dish soap or vinegar, to avoid damaging your PVC pipes. To test to see if a clog has been removed before sink will not drain, use the following methods.

Disposal: Oftentimes, the problem stems from a garbage disposal, which can be easily removed. If the garbage disposal isn’t turned on, try resetting it. Oftentimes, this will remove the clog and allow water to drain through. If this doesn’t work, try using a coat hanger to push the blockage out.

Sink snake: A sink snake can also be used to clear a clog. You can purchase one for home use or rent one from a plumber. Always wear gloves and use a flashlight to see into the drain cap. Before using the sink snake, run water through both sinks to see if the clog has been removed. Afterwards, use a plunger to flush the water out of the sink.

Garbage disposal: If you don’t have one, you can always check the garbage disposal system to see if it’s malfunctioning. Whether it’s the dishwasher, kitchen sink, or toilet, garbage disposals can all cause problems with drainage. Regardless of the cause, it’s important to test to see if the clog has been removed before your sink won’t drain.