Skip to Content

Common SharkBite Fittings Problems

You’ve probably read about the common problems associated with SharkBite fittings. However, did you know that this technology is also reusable? And what about its twist-lock and push-to-connect technology? Are there any safety concerns that may arise? Read on to learn more. Below are some examples of what you should look for when buying SharkBite fittings. And don’t forget to read the customer reviews.

Push-to-Connect technology

SharkBite brass push fittings feature an advanced push-to-connect design that connects two pipes in a single step. The push-to-connect design involves two main steps: the pipe is first pushed through the release collar and a stainless steel grab ring with teeth. The pipe is then pushed through a protective o-ring, where it is aligned. The o-ring then compresses between the fitting’s wall and the pipe when it reaches the tube stop.

While both SharkBite and OmniGrip fittings are compatible with PEX pipe, the latter requires a special insert. Fortunately, SharkBite and ProBite fittings include these inserts, which are easily inserted by pushing the pipe through the fitting. John Guest fittings, on the other hand, require the user to manually insert the inserts into the pipe ends.

Although both SharkBite and GatorBite brass fittings are lead-free, they carry a California Proposition 65 warning that states that they contain chemicals known to cause cancer, birth defects, and reproductive harm. However, these products should not be wrapped in silicone, and they should not be installed with the help of special tools. To prevent these problems, it is advised to install the brass push fittings with a panel near the fitting.

If you have issues with SharkBite fittings, try installing Quick-Connect fittings instead. These fittings work just as well as SharkBites, except that they can be more easily disconnected. However, it is important to know how to disconnect them properly to avoid future problems. The first thing to do is ensure that the size is correct. Choosing the wrong one can result in a leak.

Choosing the correct fitting for your installation is very important. SharkBite fittings are very easy to install. To get the most out of them, you should try to insert them one inch higher than the cut end. To be sure that they fit, you must measure the length of your pipe and read the packaging. Once the fit has been properly installed, you should hear a click. After you’ve finished, you’ll have an easier time connecting sharkbite fittings to your pipes.


Compared to other types of pipe fittings, SharkBite is more flexible and can be easily disconnected with the use of tongs or disconnect clips. The John Guest quick-connect fittings are ideal for smaller diameter tubing and are interchangeable with compression fittings. Unlike SharkBites, they are UV-resistant, making them ideal for outside use. However, you should use the right tools to disconnect the fittings from the pipe before installation. To avoid burs or scratches, use a pipe cutter. Do not cut the pipe using a hacksaw, as this will cause an O-ring seal failure. Make sure to use the correct size disconnected tool and follow the instructions on the product packaging.

SharkBite fittings are comprised of three parts: an O-ring, a collet, and a locking mechanism. All of these parts can be used for connecting copper, CPVC, and PEX pipes. Using the SharkBite flex hoses will save you time and money as you will not have to worry about soldering. Another benefit of SharkBite fittings is that they are certified for both hydronic heating and potable water supply applications.

SharkBite fittings are also approved for use behind walls and underground. However, they do not seal properly with CPVC or soft copper. If you want to use sharkbite fittings for these materials, you should install them behind walls to protect them from harsh weather. Just be sure that the water pipes are not exposed to sunlight. The UV rays can dry out the rubber O-ring, and the fitting may not be safe.

Although push-fit fittings are less flexible than soldering, they are just as durable as soldering and can be installed in all parts of the plumbing system. However, professional plumbing technicians still prefer soldering, because it is a more permanent solution. Fortunately, SharkBite fittings are more flexible and are suitable for a range of plumbing repairs. And if you’re a do-it-yourselfer, SharkBites are the best option.

Twist-lock technology

The revolutionary twist-lock technology found on SharkBite fittings is a patented way to connect PEX and PE-RT pipes with a single connection. Unlike traditional push-fittings, twist-lock fittings are quick-connecting and reusable, and no tools are needed to complete the connection. These innovative and durable plumbing fittings are compatible with a variety of pipe types, including PEX, PE-RT, and polyethylene.

Twist-lock fittings combine a stainless steel collet with an O-ring to provide a leak-proof seal. The twist-locking screw-cap also locks the pipe into place, ensuring a leak-free joint every time. In addition to being reusable, Twist-lock fittings are also certified by the John Guest Technical Checklist and are backed by a 50-year warranty.

Another important feature of SharkBite fittings is their ability to be installed easily and quickly. Because they feature a rubber O-ring, they are safe for buried and behind-the-wall applications. However, they’re not recommended for permanent connections, as sunlight can cause the rubber O-ring to dry out and crack. However, if you plan to use your SharkBite fittings frequently, you’ll want to invest in a high-quality product.

Another benefit of SharkBite fittings is the fact that they’re compatible with copper, PEX, and CPVC pipes. The copper pipe is accommodated on one side of the fitting, and the PEX pipe is pushed into it. Using SharkBite fittings means that you don’t have to worry about soldering or worrying about the plumbing system. The connection is made in seconds, and you don’t even have to use special tools to connect these pipes.

Because SharkBite fittings use compression technology, they’re more reliable than sharkbite in terms of seal strength. Once in place, the sharkbite should be screwed into place. To remove a SharkBite fitting, you’ll need the disconnect tongs or clips. PEX was once banned in California because of toxic substances. After testing, however, the technology has been proven safe. PEX is now legal in California and is included in the principal plumbing codes.

Safety issues

Sharkbite fittings are not a good choice for your pool. They are not designed to maintain electrical contact, and they may contain non-metallic parts that can interfere with it. Because of this, there have been a number of lawsuits against sharkbite fittings, as well as car manufacturers and drywall makers. It is a good idea to read about the safety concerns with sharkbite fittings before installing them in your pool.

Paint can corrode the plastic cufflink that connects your pipe to your sharkbite fitting. Then, the paint can press against the cufflink and lead to leakage. Using the correct tools for the job can prevent this. You can use a depth gauge or a deburr tool to properly insert the pipe into your SharkBite fitting. If you are not comfortable using these tools, you should purchase a PEX pipe stiffener to make sure the pipe maintains its round shape.

Another issue with Sharkbite fittings is their price. One fitting can run you eight to ten dollars, which can be costly if you’re working with many pieces of copper pipe. This difference quickly adds up when you’re installing multiple fittings. In addition to the high price, you’ll have to spend several hours soldering the fittings to the pipe, which can prove expensive, especially if you’re planning to install a pool.

Another safety issue with SharkBite fittings is their lubricant, which wears off over time. Exposure to UV rays can also lead to leaks. You can get around this issue by using an alternative fitting that has been rated for prolonged exposure to sunlight. Its rubber o-ring will last a long time, but this is not a good option for outdoor pools. It is also possible to lose a sharkbite fitting if you accidentally pull on it.

Another potential issue is its limited range of applications. Because they are a push-fitting, they can result in leaks and can damage pipes. They should also not be used outdoors, since their plastic materials aren’t meant for continuous exposure to UV light. Moreover, they aren’t suited for permanent connections. The best place to use SharkBite fittings is underground or behind walls. However, they can be used for a temporary connection in many locations, though they aren’t a good option for permanent connections.