Skip to Content

How Much Does Faucet Installation Cost?

How much does faucet installation cost? What should you consider when choosing a new faucet? Let’s look at three important variables that influence the cost. These include Materials, Finishes, and Location. Listed below are some of the most important factors to consider when comparing faucet installation costs. Read on to learn more. This article will also explain why materials and finishes matter so much. It is important to understand your needs before hiring a contractor to install your new faucet.

Variables that influence the cost of installing or replacing a faucet

The cost of installing or replacing a faucet depends on the type of faucet you choose, the materials used, the finish and any drilling required. Certain problems with the existing plumbing system can also increase the cost, such as low water pressure, leaky connections and broken shutoff valves. Some faucets, like wall-mounted ones, require additional drilling, and features such as adjustable streams or LED lighting can also be more expensive.

The price of a new faucet will vary by type, materials, and location. Some faucets are frost-free, which can prevent the pipes from freezing. Another factor that determines the cost of installing or replacing a faucet is the type of handle you choose. For instance, a lever-styled faucet may cost as little as $60, while a cross-styled faucet can cost upwards of $200.

The cost of labor is the most important variable, as it will account for half the total price. Plumbing work will also be necessary, as the plumber will have to remove the old faucet. If the faucet is in good condition, removing it yourself will not increase the price of the project. A rusted faucet will, however, add to the cost significantly. To avoid the added expense, call a plumber to install the new faucet.

Depending on the type of faucet you purchase, the price of installation will also depend on how many holes are required in the countertop. If the old faucet is rusted, it may be necessary to saw it out or modify the countertop. These extra steps can add up very quickly. For a more affordable price, purchase a faucet that matches the existing plumbing. You can even consider installing a water filtration system.

The average cost of a wall-mounted kitchen faucet is anywhere from $100 to $300, but can vary considerably depending on the type of wall and faucet. If the plumber must be called back multiple times, the project will require multiple visits. It can be complicated to install a wall-mounted faucet beneath a window, and the plumbing is hidden. Finding leaks and turning off the valve can be a costly process.


Faucet installation costs are determined by a variety of factors, including the material used for the body of the faucet. Copper, nickel, chrome, and brass are all more expensive than their plastic counterparts. There are also several finishes to choose from, including nickel and oil-rubbed bronze. Almost every material available comes in a variety of textures and price ranges, and the most expensive finishes are chrome and antiqued. Satin and brushed finishes are cheaper options, while polished finishes reflect light.

Getting a free quote from a licensed plumber is a great way to learn more about the cost of installing a faucet. You can also request a quote for the installation alone if you have the materials for the project, such as a new faucet. This saves you the time and energy of a DIY project. Local plumbers also know what materials are required and how long it will take to complete the project.


Depending on your budget, you can install a basic kitchen faucet or go for a high-end model. The materials used for faucet bodies vary widely, including brass, stainless steel, and nickel. You can also select a brass or chrome finish, which are popular for modern homes. Bronze and nickel finishes have an epoxy coating that makes them sturdier than chrome, but require frequent maintenance. Zinc and bronze finishes are a less expensive option, but you’ll probably have to replace them more often than other finishes.

The cost to install a faucet depends on many factors, including where you live and whether or not you want the faucet to be installed in a bathroom. In general, bathroom faucets cost about $100 to $300. Some models have a motion sensor that turns them on or off when motion is detected. Touchless bathroom lavatory faucets are more expensive and can activate by motion sensor. Complete sets of faucets are available for around $50-900. If you’re installing a faucet in a stall, you might need a shower head and valve, or just the valve.

A kitchen faucet made of brass costs between $100 and $1,500. It is commonly applied by electroplating and is a good choice for homeowners looking for a high-end faucet. While this material is considered non-reactive and may eventually develop a patina, it will never become corrosive. However, make sure to clean the faucet after every use, according to manufacturer instructions. You may also want to invest in a matching sink or faucet to complete the look.

Faucets are not cheap, but if you’re looking to update your bathroom faucet, you can hire a handyman to do the job for you. Handymen charge about $50 to $80 per hour. It’s easy to find someone with experience, but wall installations are a better option. The installers will be able to adjust mountings and handle other plumbing issues, including temperature adjustments. Generally, the labor costs for wall installations include the removal of the old faucet. Make sure to check if it’s already in the wall or not, as it can be damaging to connectors and mountings.


The average price for faucet installation ranges from $500 to $1,500, and varies depending on the location, faucet type, and number of visits. Some installation companies offer financing, and you can ask them to remove the old faucets before installing the new one. However, if you plan on installing a faucet in the kitchen sink, you should be aware that the plumbing for this project will be hidden in the wall. This can make it difficult to identify leaks, and finding the valve to shut it off is expensive.

The most flexible cost for faucet installation is labor. However, labor costs vary widely by region. For example, a plumber working in a high-cost area will charge more than one in a low-cost one, simply because of the cost of living in his region. The type of faucet you choose will determine the installation cost as the plumber will need to move your water lines, which takes more time. You should check the directions that come with your faucet before scheduling an installation.

For new sink and faucet installation, you will need to replace your existing plumbing. This work is complicated and expensive, and can cost $450 to $1,000 per fixture. Additionally, if you plan to install a garbage disposal, you will need to install new water lines. In addition to repiping your sink, you may need to replace the plumbing pipes that connect the faucet to the sink. Installation of a garbage disposal can cost up to $380.

Choosing a licensed plumber is always the best option. While it may seem like an investment, it will pay off over time if you have a reliable plumbing professional installing the faucets for you. A plumber can make your plumbing in tip-top condition and ensure your home remains leak-free. American Plumbing Services offers free consultation and estimates. So whether you choose to replace your faucets yourself or hire a plumber to do the installation, you can rest assured that your new faucet will look beautiful.

The average cost of a new faucet installation is between $120 and $300. This cost does not include adjusting water lines and removing broken parts. If you hire a plumber, you can expect to pay anywhere from $120 to $350. You should also factor in the labor cost, which typically ranges from $45 to $150 per hour. Most plumbers charge an hourly rate for labor, so be sure to budget for extra work, as you don’t want to pay for more than you have to.