How much does it cost to snake a drain? There are several factors that affect the cost of snake draining. You can either rent a hand-operated snake or hire a professional to do the work. Listed below are some factors to consider when getting a ballpark price for snake draining. The price of the snake will depend on the time required for the job and the complexity of the drain. The cost to snake a drain will also depend on the type of drain that needs to be snaked.
Renting a hand-operated snake
Before renting a hand-operated sewer snake, you should find out how to properly operate it. Sewer snakes are available for rent by the day, half-day, or hour. Sewer snake rental machines are also available to clear main lines. However, they should only be used by trained professionals, as misuse can lead to severe injuries and damage. Sewer snake blades can become stuck on obstructions, and the cable can break.
You can rent a plumbing snake from a rental company for around $100 per day or $300 per month. A machine auger rental company will typically charge around three times more and is a better option if you are not sure of what you’re doing. Besides, plumbers are likely to have several of these tools in their homes, so you’ll have a better chance of finding a quality snake.
Before renting a hand-operated snake to snake your drain, it’s important to understand how these different types of equipment work. While both of these types of snakes can unclog a drain, they will not reach as deep as a plumber’s snake. So, when should you rent a hand-operated snake? Here are some things to keep in mind:
Plungers can unclog a sink or toilet, but they are not effective for main sewer line clogs. You should hire a plumber to handle these situations. It’s best to use a hand-operated snake for any clog in a main sewer line, and it’s also cheaper and more effective. There are several types of plumbing snakes available for rent, depending on the size and shape of the clog.
Choosing a professional
There are two main reasons to hire a professional plumber to snake your drain. First, clogged drains can cause expensive flooding. If more than one drain is affected by a clog, it’s possible the clog occurred in the main sewer line. In such cases, a plumber is necessary to clear the clog and prevent further damages. The process of snake removal usually takes about an hour. A plumber will charge between $200 and $500 to snake a drain.
Secondly, you should consider the size of your drain. Most drain snakes are a few inches long and thick. In multi-story homes, choosing a snake that has a 50-foot cable is a good idea, as it can reach clogs in longer pipes. It is also a good idea to hire a professional if you don’t have a lot of time to spare.
Third, you should know what type of snake you need. Snakes and augers work best in smaller pipes. Larger pipes don’t usually clog, but they need a mechanical auger or replacement. You can do it yourself if you know how to use a snake or plunger, but it’s not as effective as a professional. For larger pipes, you should hire a professional plumber.
Lastly, you should know that snaking can cause more damage than it is intended to. While you may be able to clear a clog yourself, excessive force can cause cracks and damage your plumbing. Moreover, snaking can actually exacerbate the problem by jamming the debris tighter and further down the pipe. When you choose a professional plumber to snake a drain, you can be rest assured that the job will be done right the first time.
Getting a ballpark price for snaking a drain
The price of having a plumber snake a drain will vary. Some plumbers will charge a flat rate for the service, and that may be convenient if you’re just looking for an estimate. But be aware that a flat rate doesn’t guarantee that the plumber will clear the obstruction completely. Some plumbers charge an hourly rate to snake a drain and may have to spend a lot more time than expected to clear a blockage.
The price of a drain snake depends on the severity of the clog and the location of the clog. A drain in a bathtub or shower can be extremely full of debris and difficult to clear. While a sink or shower drain may cost as little as $70 to $109, a clog in a main sewer line can cost $500 or more. And if you’re having a problem with a toilet, you may end up paying a plumber more than you should, so be sure to ask before signing on the dotted line.
It’s not uncommon for plumbing contractors to charge up to $175 or more to snake a drain. If you’re unsure of the cost of a snake drain cleaning, check out the average price for a kitchen sink snake. The average cost for a shower drain snake is $200 to $300, while the cost of a toilet snake costs about three times that. In addition, a toilet clog can cost up to $350.
Snaked drains are generally easy to clear, but they can be a challenge for plumbers. Plumbers use a thin snake for clogged drains, but they may also use a slender electric auger to clear compacted materials. Some drains, like those in driveways, are extremely difficult to snake because they’re full of hard-to-remove materials. Tree roots can grow into the pipes, or gravel and dirt fall into the broken sections, causing total blockages.
Time it takes to snake a drain
You may be wondering how long snake drain cleaning takes. The process involves feeding a snake-like auger through the drain line inch by inch. As the snake moves forward, it catches any clogs and pulls them out. This process can save you a lot of money and time over time. Time it takes to snake a drain will depend on the size of the clog, since bigger clogs take longer to break down. If the clog is too big, you might need to repeat the procedure.
When snake-cleaning a drain, make sure you wear protective gloves and goggles. Always keep a bucket nearby. Once you have prepared the tools, insert the snake into the drain. Make sure to hold it as close to the pipe opening as possible, and slowly work the snake into the drainpipe. If the cable is feeling tense, you can stop the snake and seek professional assistance. However, you should not use more than two snakes in a drain.
Before you attempt to snake a drain, you should first check the type of drain in your house. The plumbing under the kitchen sink is usually narrower than the main drain, which can handle multiple sources of water. The plumbing under the sink can also be clogged with hair or debris. Hair can snag and trap soap and debris and can tangle with the coils of the snake. If you’re using a sink, bathroom sinks are the easiest drains to snake.
It’s important to understand the difference between a simple clog and a major sewer line clog. A simple clog in the sink can be cleared in five minutes, whereas a major one near the main line can take hours or even days. The plumber will need to clear a series of pipes, so the clog could be in several locations. The process of snake drain cleaning can take anywhere from a few minutes to several hours.
Risks of using a drain snake
A drain snake is an easy tool to use, but there are some risks associated with using it. You should first follow the steps carefully. Never use force to push the snake into the drain; it can damage the entrance to the drain or the pipe. Always use a slow, consistent speed when coiled. Also, you should never force the auger into the drain – this can damage the pipe and drain entrance.
You may be exposed to harmful bacteria. The tip of a drain snake can cut or puncture the skin. This could result in an infection. You should also be aware of the time required to clear a clog. A drain snake operator must take into consideration the length of the drain and its location. Using it without proper training or supervision can result in an injury. Moreover, using a drain snake can be difficult and time-consuming.
One of the major risks associated with drain snakes is that it may not remove the clog completely. Even if you use the snake correctly, you may knock out chunks of the hardened deposit. These chunks could further clog the pipe. This is why Nu Flow recommends hydro jetting instead. In some cases, drain snakes can cause more problems than benefits, so you should never attempt this at home without the help of a professional plumber.
You can damage your plumbing system by using the wrong drain snake size or type. You also run the risk of damaging your pipes by accidentally hitting them with the wrong size. Even if you’re using a manual snake, it can still damage pipes if used improperly. A drain snake can also cause serious injuries. Make sure you consult a plumber if you’re unsure of how to use a drain snake.