Skip to Content

How to Clear a Basement Floor Drain If it’s Clogged

If your basement floor drain is clogged, there are many ways to clear it. Using a power auger to unclog the drain can help clear the blockage. If you’re not comfortable using a power auger, you may need to call a professional drainage company. If you’re unable to clear the blockage on your own, you can always try using Coca-Cola to break down the buildup.

Problems with basement floor drains

Clogged basement floor drains are the most common plumbing issue that home owners face. A basement floor drain can become backed up due to various reasons, from clogged drains to grit from snow-covered cars. When these issues occur, homeowners should investigate the cause of the backup before calling a plumber. There are some ways to avoid these problems and prevent them from happening in the first place. Listed below are some common problems with basement floor drains.

Cleanouts are typically 4 inches flat with a square notch at one end. To clean them, homeowners can purchase a hand-held drain snake or auger. Then, they can push the snake or auger down the drain and rotate it until they reach the end. They can then pull back to remove debris. Make sure to wear protective clothes and a face shield when working with basement floor drains. Remember to follow all safety precautions before attempting to clean basement floor drains.

One common cause of clogged basement floor drains is a broken main sewer pipe. When this happens, the basement floor drain will overflow and the liquid will back up. A broken or rusted main drain pipe will make a basement floor drain backed up. To prevent this, you should regularly clean the floor of your basement, especially around window wells. Also, metal draining covers can rust if they are exposed to water for a long time. This will eventually lead to a sewer line clog, so it will be necessary to replace the pipe altogether.

If you live in an older home, the sewage line from your main sewer can also clog and back up. It can back up your basement floor drain and pose a health risk to you and your family. Raw sewage is considered Category 3 water because it is made of toxic microbes. They can cause illnesses in humans when contact or inhaled. Sewage backup may also occur as a result of a blocked sanitary main in your city.

Methods of clearing a clogged drain

To clear a clogged basement floor drain, there are several methods available. Using a drain snake or a drain auger is a good option if the clog is shallow and has gotten deeper. Using a wire hanger as a drain snake works just as well, because it will quickly feed through the clog and dislodge any residue stuck inside. After using the drain snake or auger, you should wipe down the drain with an old rag, flush the drain with water, and replace the cover.

A drain snake consists of a long, flexible metal cable with a rotatable handle at one end. You thread the cable through the drain, which should have a P trap. Attach the auger to the rotatable handle. As you rotate the snake, the auger unwinds, latching onto the clog and shredding it. This method works best if you are able to feed the cable through the restriction without getting caught on the wires.

The main cause of clogs is hair. Both human and animal hair can clog basement floor drains. If the drains are not equipped with drain screens, this type of waste can cause a partial clog to become a complete blockage. Another reason why a basement floor drain is prone to clogging is due to the accumulation of grease and other sticky wastes. To clear a clogged basement floor drain, use a plumbing snake.

There are several methods of clearing a clogged basement floor sink. However, a professional plumber is recommended for any major repair work. Clogged pipes can cause water flow issues, and in some cases, they may need to be replaced. In addition to clogged pipes, a clogged basement floor drain can also be caused by deteriorating pipes or invasive tree roots. If this happens, it is recommended to hire a plumber for further inspection.

To prevent a clogged basement floor drain, turn off the water main. A backed-up drain is an electrical shock hazard. Additionally, the water in backed-up sewer pipes can contain bacteria and pathogens. You should always wear protective gear while handling backed-up sewer water. This is because a clogged basement floor drain can result in a basement flood.

Using a power auger to clear a clogged drain

If a manual auger has failed to remove a clogged basement floor drain, consider using a power auger to clear the blockage. This tool features a metal snake attached to an electric motor. These tools can clear the obstruction from a drain within a few meters. Depending on how severe the blockage is, a power auger may cost $50 or more per day to rent.

When using a power auger, start with the shortest length of pipe leading away from the clog. Insert the auger cable and work back and forth in the pipe, breaking up the clog as you go. Using a garden hose can also help with the job, but you should always use caution when using one. A hose can carry debris, so you should avoid it.

A power auger weighs around 200 pounds, so you may want to hire a helper to get it into the drain pipe. A power auger works by spinning a metal line to clear the drain. Once inside the drain, you feed the cable through the drain using your hands. Make sure to use gloves, as it’s possible that the cable may wrap around your wrists.

Another option for clearing a clogged basement floor drain is to use a power auger. The auger’s powerful motor can remove the clog from deeper into the plumbing system. These tools will also help you clear larger, more difficult blockages from your pipes. A power auger can be bought for around $250, but most people opt for hiring a professional plumber to do the job. These professionals will also give you valuable insight on preventing future clogs.

If a power auger isn’t an option, try a plunger. A plunger works well in clearing a deep clog. To start, place the plunger over the drain and pump it quickly. You should feel a difference in resistance after ten or fifteen plunges. If you’re unsure whether the water is flowing properly, pour some water down the drain and test it.

Coca-Cola helps break down buildup in a clogged drain

The acidity of Coca-Cola can dissolve grease and other buildup in clogged basement floor drains. But this method will leave behind a sticky residue that may lead to future problems. Instead of Coca-Cola, try vinegar and hot water or baking soda. The acid content in Coca-Cola helps break down the buildup and dissolve it, but it is not environmentally friendly and toxic.

A 2-liter bottle of Coca-Cola will help unclog clogged drains. But be sure to let the soda fizz at room temperature for an hour before you use it to flush the drain. The soda will work because of its phosphoric acid content. Once the soda fizzes, you can then flush it with hot water. The soda also absorbs any foul odors and stains.

A bottle of Coca-Cola will dissolve the clog in a basement floor drain faster than any commercial drain cleaner. Soda’s sugar content is also high, so it will push back the foul substance and make it more difficult for water to pass through. Soda isn’t the best solution for a clogged basement floor drain. Instead, use a drain cleaner that is safe and effective.

Adding baking soda to the drain pipe will help dissolve mild clogs. Baking soda, which helps break down a buildup, will fizz and loosen the buildup. You can then flush the solution with hot water to flush out any residue. But if it doesn’t work, you can always use a plunger to clear the clog.