Skip to Content

How to Fix a Washer Drain Backing Up

Having a washer drain back up is never a fun experience, but thankfully, it is not an impossible problem to fix. Listed below are some solutions to common drain problems. In addition, we’ll cover what causes clogged drains, what to use to unclog them, and a power auger. A professional plumber will have the proper equipment to repair your machine’s drain and find the problem quickly.

Problems with a washing machine drain

Clogged drains can lead to water backing up into the bathtub or kitchen sink. A professional drain cleaning service can remove this clog and restore the water flow. Do not flush grease or food down your kitchen drain to avoid this problem. Clogged drains often indicate that the water inlet valves have problems. These valves connect the two water hoses that run to your washing machine. They control the flow of hot and cold water.

A common cause of a blocked washing machine drain is a broken drain pump. This is a common problem that affects both traditional top load and front load machines. Drain pump failure is almost always a mechanical problem and occurs more often in older washing machines. In most cases, you can repair the drain pump instead of replacing it. But if you don’t have the money to buy a new one, you can try some simple tips to prevent this issue from happening again.

If the water is flowing slowly and takes a long time to overflow, there could be a serious blockage somewhere in your drain pipes. In such a case, a licensed plumber should be consulted to inspect the sewage line in your home. The quickest way to resolve this problem is to stop the washing cycle. In addition to preventing an overflow, you should inspect your washing machine for damage and kinks.

Common causes

If your washer has a clogged drain, you may want to try using a snake to clear it. Snakes work by twisting in the opposite direction to break up the clog and release it from the drain pipe. You can also use baking soda, vinegar, or hot water to clear clogs in the drainpipe. But be aware that this can only help temporarily. You should still hire a plumber if the problem persists.

There are a couple of reasons why your washer drain might be backing up. First of all, if your washing machine is an old model, it is unlikely to have a newer model that has a larger drain line. It may have a one-inch drain line, which is not compatible with newer washers. A better solution is to have your drain lines installed by a plumber to avoid any hassles.

Sometimes, a washing machine drain clogs during normal operation. The pipes that connect the washing machine to the drain are routinely filled with small fabric fibers. These clogs cause water to back up. Fortunately, you can usually resolve this issue by clearing the clogged pipe. This simple task is easy and doesn’t require any special tools. You can use a pot or bucket to empty the clogged drain. If the problem persists, you can contact a plumber to clear the pipe.

Enzymes that work to unclog a clogged drain

One of the most common causes of a backed-up washer drain is soap residue buildup. Powdered detergent and homemade laundry soaps can all lead to clogs in the pipes. Using enzymes that work to unclog a clogged washer drain can help keep your washing machine running smoothly and odor-free. These enzymes work by breaking down the organic material in your drainpipes without causing any damage. But before you try this method, wear a face mask and vent your room so that fumes don’t get into the walls.

One type of enzyme drain cleaner works by adding bacteria to the organic matter that has clogged your drain. The bacteria will feed on the broken down organic matter and clear the drain. However, you should be patient because enzyme drain cleaners don’t work instantly. The best drain cleaners take time to work, but once they start clearing the clog, they are worth the wait.

Another type of enzyme can unclog a plugged washing machine drain. When combined with hot water, enzymes can dissolve the soap scum and lint in the pipe. However, if you only use the hot cycle, this method won’t help. If you use the cold cycle, you may have to try the enzyme solution. However, it should be noted that this method is not recommended for every clogged washer drain.

Using a power auger to unclog a clogged drain

To use a power auger to unclog your plugged washer drain, make sure to run the water and let the auger feed through the drain pipe. Start by feeding the auger cable slowly through the drainpipe, and then slowly back out. If the auger runs into a large clog, make sure to cut different sections of the clog, and then rinse away the cuttings. Then, repeat the process with hot water to wash away any remaining debris.

You can also rent a manual drain snake or an electrical auger. If you do not own one, simply follow the directions provided by the dealer. Insert the snake end into the drain opening and slowly move it down. You may have to apply a bit of pressure to bend around the trap. Once you’ve wiggled the auger through the clog, uncoil it fully.

To rent a power auger, follow the directions on the package to make sure it works well. The auger is comparatively expensive, and you can choose to rent a model for less than $250. Make sure to rent an extension cord to plug it into the wall. If you don’t have one of these tools, check with your local hardware rental store. Also, make sure that the water supply is turned off before attempting to unclog a clogged washer drain. Remember not to let any water flow through the drain after attempting to unclog it, as you could cause bigger problems.

Preventing a clogged drain

The first thing you should do if you discover a clogged washer drain is to stop the washing machine. Clogs put a lot of strain on your plumbing, which could lead to further damages to your home. If you suspect your drain is clogged, you can contact a plumber. You can use Networx to locate a local plumber. You should always contact a professional plumber to have it inspected.

You can buy granular or liquid enzymes to clean the drain. This is a very convenient way to clean your drain without having to spend a lot of money. Enzymes in the drain pipe are especially effective at breaking down soap buildup and other organic material. It is also a reminder to change the mesh lint trap every month. Another simple yet effective way of cleaning the drain is to change the mesh lint trap every month. By doing this, you will have a clean lint trap and prevent overflows.

Another way to prevent a clogged washing machine drain is to install a drain snake. This snake works by pushing a coil into the pipe repeatedly, and by turning the handles, you can get a deeper access to the clog. However, make sure to use the right size of the snake because the wrong size could damage the plumbing. If the clog is really large, you may need to hire a plumber or use an attachment to your drill to clear the drain.

Cleaning a clogged drain

If your washer’s drain is clogged, you can try to clear the blockage with a simple snaking action. To do this, insert the drain snake into the pipe from the outside and twist it counterclockwise to break up the clog. Then, remove the drain snake and repeat the process to clean the drain completely. If this is unsuccessful, you can also try to use baking soda or vinegar, which are also known to loosen clogs in drain pipes.

If you’re having trouble draining water through your washing machine, pour a cup of boiling water into the drain. Leave the mixture in the drain for at least an hour, and wait until it cools down. If this is unsuccessful, try adding a quarter cup of baking soda to the drain. After this process, a few hours should work to clear the drain completely. If you’re still having problems with a clogged drain, you can also try vinegar or white salt.

Vinegar is another option for cleaning a clogged washer drain. It doesn’t just clean the interior of the machine but also removes bad odors. A good amount of vinegar can even clean the drainpipe. When used in the right proportion, this method will help to clear the clog without damaging the pipes. A homemade solution of vinegar and water can also be effective for cleaning a clogged drainpipe.