Skip to Content

Sump Pump Maintenance – How to Clean the Impeller and Check For Leaks

There are several steps you should take to ensure that your sump pump is working properly. In this article, we will cover how to clean the impeller, check that the pump is pumping water and make sure that the discharge pipe is flowing away from your home. Finally, we will discuss how to check for leaks. We’ll cover all of these steps in more detail. Once you’ve taken these steps, your sump pump should be working properly.

Cleaning the impeller

A small filter attached to the sump pump called the impeller is easily clogged and can affect the efficiency of the pump. A clogged impeller will prevent the pump from working properly and can result in a noisy pump. Cleaning the impeller during sump pump maintenance is a good idea for restoring the pump’s functionality. Here’s how to do it. First, remove the impeller from the sump pit.

To clean the impeller, remove debris from the discharge hole and check valve. The discharge pipe is just as important as the impeller and should be disinfected periodically. Use a Q-Tip or a needle to remove any debris. Next, clean the impeller, a small filter mechanism attached to the sump pump. It can easily become clogged and should be cleaned after every use.

Some pumps have weep holes that prevent water from reentering the sump pit. Using a toothpick or a similar object, clean these holes to keep the pump working properly. Be careful not to break or scratch the impeller as it could cause damage. In addition to the check valve and impeller, the weep hole is also a place where debris can collect, causing the pump to stop. Cleaning the impeller will restore pump performance.

A sump pump float is a key part. It rises with the water in the sump pit. When the float reaches a certain height, the pump turns on automatically. However, if the float does not rise as high as it should, it is time to replace it. The float can also be affected by debris. It is recommended to periodically clean the float to avoid a malfunctioning sump pump.

Checking if the pump actually pumps water

There are several ways to check if the sump pump actually pumps water. Before you call a plumber, make sure that the sump pump is plugged in and that the float is resting on the water surface. The float will need to be raised a few inches off the ground in order for the pump to operate properly. Check the discharge pipe as well as the inlet screens with a flashlight. Listen to the motor to see if it is spinning, and make sure the pump turns on and off twice.

If your sump pump is running constantly, it may be nearing its end of life. It should only cycle a few times a day. You may also have the wrong size for your home and a pump that is too small will struggle to pump water and overwork its motor. In these cases, you should contact a plumber for an immediate fix. If the sump pump is constantly running, you may want to consider replacing the pump.

Performing periodic maintenance checks is a smart way to avoid costly repairs. Basement flooding can be a nightmare for a homeowner, resulting in extensive damage to the lower floors and even affecting the foundation. But with a little preparation and quick maintenance checks, you can prevent this disaster from happening. Checking if the sump pump actually pumps water can help you prepare for spring’s rains.

Before calling a plumber, you should check the float switch on the sump pump. If the pump is turning on when the water level in the sump basin falls below a certain level, it may have a defective float switch. In this case, you should replace the float switch to ensure proper functioning of the pump. Also, a defective check valve can cause the pump to run indefinitely or to shut off and start all over again.

Checking if the discharge pipe is flowing away from your house

A properly functioning sump pump will discharge water away from your house when the pump is running. Make sure the discharge pipe is positioned far enough away from the house so that water cannot cycle back into it. Water that does not drain properly will back up the system and flood your basement, resulting in a swampy yard. A sump pump must have an escape path in case it clogs or freezes. If the pipe is not pointed away from your home, install a hose extension or splash block.

To test the pump, find the sump pump by using a flashlight. The sump pit may be located in the basement or crawlspace. You will see a round pit with a plastic or steel lid. You’ll be able to follow the discharge pipe, which comes out of the pit and exits your house. Once you have located the sump pump, you can trace the pipe from its pit to the discharge pipe.

There are many reasons why your sump pump is failing to function properly. These include undersized discharge pipe, a broken check valve, and a clogged discharge pipe or intake. If one of these is causing your pump to fail, contact the manufacturer or a plumber. If you have a flooded basement, you should turn off your electricity before attempting to fix the sump pump. If you attempt to perform this task yourself, you may experience an electric shock.

The impeller of your sump pump is another potential cause of clanging or grinding noise. This valve is responsible for preventing water from flowing back up the pump and into your home. If it fails to function properly, the discharge pipe will open and send the water back into your house. A licensed technician will be able to diagnose the problem and repair it accordingly. For an additional fee of between $45 and 65 per hour, a sump pump repair professional should be called in.

Checking for leaks

During annual sump pump maintenance, you should check the drainage line for debris. Generally, the drainage line remains clear. However, it can become clogged if mud or debris accumulate in the sump pit. During the annual maintenance, make sure you remove debris and clean the inlet screen. You should also check the drainage pipes and the grate for rust. Finally, make sure you fill the basin with water to avoid dryout.

When performing sump pump maintenance, you should also check for any malfunctions or wear and tear. Oftentimes, these malfunctions result in burned-out sump pump motors, which have to work overtime. If a pump has a defective motor, it may shut down repeatedly. You can try to find a leak by unplugging it and plugging it in another device. This way, you’ll know if the pump is working properly.

A check valve is a good place to check for leaks during sump pump maintenance. Its valve stem can be repaired with plumber’s Teflon tape. If the leak persists, replace the valve seals. Make sure the check valve is pointing towards the sump pump. If it isn’t, water may flow back into the pump even after you turn it off. If this happens, you should call a plumber immediately.

Regular sump pump maintenance requires that you check the sump pump at least twice a year. Checking for leaks during sump pump maintenance is an essential part of keeping the pump running smoothly. Make sure you check your sump pump regularly – every spring, summer, and fall – to detect any problems before they become serious. Moreover, it helps to have a professional plumber check it for you so that you can take action when needed.

Checking for clogs

As part of your sump pump maintenance, it is essential to check the filter for clogs. While the filter is effective at catching many types of obstructions, you may notice a few that are not easily removed. These obstructions can prevent the pump from running properly. In order to clear the filter, you may need to disconnect the pump’s drainage line. Once disconnected, clear any obstructions in the drain line with a strong stream of water. Alternatively, you can clean the sump basin with a long flexible brush.

To check for clogs, unplug the pump. Then, inspect the discharge pipe to ensure that it is working properly. If the discharge pipe is too close to the home, water will seep back into the pump and cause it to run continuously. This can cause the pump to work inefficiently, causing it to wear out prematurely. To check for clogs, unplug the sump pump.

It is essential to check the discharge pipe for clogs during sump pump repair. The discharge pipe channels water up and pitches down. The water is then discharged from the home through gravity. To keep the water from coming back, make sure that the discharge pipe has a grate or screened vent cap. Many drain pipes will freeze during the winter months, so check yours carefully to prevent this.

The float switch is another component that must be checked during sump pump maintenance. The switch may be jammed by debris in the pit. If the switch is not working, you may need to replace it. To avoid clogs, check the outlet and the sump pit for obstructions. If the pump does not have an outlet, you may need to plug it into an outlet that is dedicated to sump pump use.