While it may be tempting to call a plumber when your toilet isn’t working, toilet replacement costs vary wildly. Whether you do it yourself or hire a plumber is up to you, but you should plan on a few wiggle rooms in your budget. A plumber may take two to four hours to complete the job, and you’ll pay around $65 an hour. A do-it-yourself replacement will cost less than hiring a plumber.
Do-it-yourself toilet replacement is cheaper than hiring a plumber
One common problem that can be solved by a do-it-yourself plumber is unclogging a clogged toilet. This task is simple but requires you to disassemble the toilet fixture. Severe clogs can also require the replacement of several drain lines. To avoid tearing up your pipes and spending hundreds of dollars on a plumber, consider doing the repair yourself.
One of the best ways to save money on a toilet repair is to buy the parts yourself. Most toilet parts are available for under $50 or can be purchased from a plumbing service. However, a plumber can charge up to $310 for the labor alone. To avoid this hefty price tag, consider buying a mid-priced model. Although it is tempting to opt for the cheapest one, it may not be of good quality.
In addition to toilet repair, you can do a toilet replacement yourself. The replacement of the wax seal can cost between $60 and $200. The wax seal connects the toilet base to the drain opening in the floor. If it’s damaged, the toilet may wobble and leak. A plumber or handyman can look for damage on the wax seal and fix it with a repair plate. If damage is more extensive, you may need to replace the entire seal.
You can also save money by not hiring a plumber to replace the toilet. Many plumbers offer free estimates. Depending on the size and complexity of the job, the price can range from $6 to $10 per square foot. Just remember to get a free estimate from the plumber before making the decision. If the plumber says it is impossible to do it yourself, the price may increase. The plumber may also charge an additional $25 to $100 for the removal.
Two-piece toilets are the most popular
When it comes to toilet replacement costs, two-piece and one-piece models are the most popular. One-piece toilets are more expensive and take up less space, but a two-piece toilet is much more difficult to clean. In addition, a two-piece toilet’s small handle is finicky and has limited flushing power. In addition, the toilet’s appearance isn’t nearly as attractive as a one-piece model.
While two-piece toilets are easier to install, they can be more difficult to move than one-piece toilets. One-piece toilets have more pieces, so it’s difficult to transport them, and they may also be more expensive to ship. Additionally, one-piece toilets have a rubber gasket between the tank and bowl, which can wear out and cause leaks. In comparison, one-piece toilets do not have this problem.
Besides having larger toilet tank and bowl parts, two-piece toilets are also more complicated to clean. Because of the gap between the tank and bowl, dirt can collect there. Toto Vespin II is an exception to this problem. Its skirted-down bowl and Toto Cefiontect glaze make cleaning easy. Toto Vespin II toilets are also available in either a 10 or 14-inch rough-in.
The cost of one-piece toilets is typically between $170 and $490 while two-piece models are more expensive. However, one-piece toilets are easier to clean and are less expensive to ship. One-piece toilets are also more convenient to install. They are often smaller than one-piece toilets, so they’re a better choice if you’re remodeling an older home.
Labor costs vary
While labor costs for toilet replacement may be a bit more than those for a bathroom renovation, they can still be a significant savings over a plumber’s fee. For instance, plumbers charge approximately $75 per hour. An experienced plumber can usually replace a toilet in one hour, but this figure doesn’t include travel time and overhead costs. In addition to the cost of the toilet, the plumber may need to relocate several other pipes in the bathroom. Nevertheless, the total cost of labor for replacing one toilet is usually around $250 to $300.
Toilet installation costs depend on several factors, including the type of toilet and the style of the bathroom. In addition to toilet brand, labor costs vary based on whether the plumbers have to modify any existing systems or structures in the home. Ultimately, these costs vary greatly depending on the size of the project and the type of replacement. However, the process of replacing a toilet can also add to the value of your home. You can save money on your water bill while lowering your environmental footprint by upgrading to an environmentally friendly toilet. As such, it is wise to buy the best quality fixtures at a reasonable price and install them properly in your bathroom.
Plumbing costs may vary, but a broken flange will cost anywhere from to to replace. Other toilet repair costs will range from $40 to $300, and the plumber may be required to replace pipes, such as the drain pipe. In some cases, the toilet may need to be relocated if water has seeped into the floor. For this, plumbers charge between $717 and $882. If you’re not handy or have the right tools, you may need to hire a plumber for the job.
Quality of the toilet affects cost
The quality of the toilet plays a key role in the cost of a new one. The more comfort features you add, the higher the price. If you are installing a new toilet in your bathroom, look for a WaterSense-certified model, as these toilets use 20 percent less water than the federal standard. WaterSense toilets must meet stringent criteria to qualify for the label, which means they use less water than ever before.
The EPA’s WaterSense certification helps consumers identify toilets that use 20 percent less water than 1.6 gallons. Some toilets are equipped with features that help you reduce your water bill and increase your comfort. The type of toilet you choose can affect the overall cost of the replacement as well as the installation costs. Depending on the amount of money you have, it’s important to hire a licensed plumber to install the new toilet. Some apartment buildings require plumbing contractors to have a license.
When comparing toilet prices, you should look for the highest quality model. Water from a toilet flush may leak through a cracked wax ring. Water will pool beneath the fixture and soak the wall framing and subfloor underneath. This moisture can cause wood rot and unstable flooring. If the toilet isn’t properly maintained, mold growth can occur. This can lead to a drop in the indoor air quality and even anaphylactic shock, a severe allergic reaction.
Installation costs can vary depending on the difficulty. Complex toilet installations require specialized equipment and may take longer. Additionally, you might end up with a toilet that requires repair work. These costs may not be included in the initial quote, so make sure to ask for a detailed itemized bill if you have to pay more than expected. Moreover, if your toilet is not in good working order, you should look for a leak somewhere near the tank.
Reusing a toilet can save money
Reusing a toilet is one of the easiest ways to cut down on your water consumption and save money on your toilet replacement costs. Old toilets often use as much as seven gallons per flush. That equates to around 12,000 gallons of water used annually, based on five flushes per day. By replacing your toilet with a low-flow model, you’ll save more than half that amount.
Another option for disposal is to donate your old toilet to Habitat for Humanity, a nonprofit organization that accepts donated building materials, including used plumbing parts and toilets. Your donation will prevent a toilet from being sent to a landfill. Alternatively, you can recycle an old toilet into a decorative planter by using the bowl or tank for growing flowers in your garden. To dispose of the old toilet properly, contact a licensed plumber.
The most common type of toilets are gravity-fed, which pulls waste through the pipes with a large amount of water. However, water amounts per flush have decreased significantly over the years. Currently, a gravity-fed toilet costs about $100 on average. Depending on your needs and the age of your toilet, it could take up to a decade to pay for itself. If you’re looking to save money on your toilet replacement, reusing a toilet is the way to go.
Before you purchase a new toilet, make sure you take all necessary measurements of the bathroom. You may need to move the water supply, vent, and drain lines to make room for the new toilet. The plumbing job could cost from $45 to $130, depending on the length and the quality. Once you’ve measured the size of the room where the new toilet will fit, you can go ahead and purchase it.