Skip to Content

Trenchless Sewer Line Replacement Cost

Trenchless sewer line replacement costs range from around $3,000 to $5,000 for smaller jobs to around $15,000 or more for larger jobs. If the sewer line is under a slab, a trench may cost $150 to $200 per foot. Whether you choose the trenchless method or a traditional pipe bursting method depends on how many feet the sewer line needs to be replaced. A good contractor should be able to provide you with a price quote based on your specific job specifications.


A CIPP trenchless sewer line replacement project costs approximately $9,000 and can cost anywhere from $75 to $250 per foot. The process involves placing a new pipeline within the old one, using only a single excavation point, and causing less damage to the surrounding landscaping. Compared to traditional pipe bursting, which costs between $60 and $200 per foot, CIPP uses less excavation and can cause a much smaller amount of damage to the home.

CIPP is the least disruptive option for repairing sewer lines. The process involves minimal outside digging, no disruption to the building’s foundation, and is ideal for pipe repairs in homes, businesses, and other structures. Once the process has been completed, technicians will clean the affected pipes thoroughly and insert a custom-made felt liner, which resembles a sock with cut ends. Once the pipe lining is installed, the pipe will be waterproof.

The cost of a CIPP trenchless sewer line replacement will depend on the size of the sewer pipe and the conditions of the surrounding landscaping. The process can cost thirty to fifty percent more than conventional pipe repair but won’t result in extensive excavation and repaving of your property. In addition, trenchless sewer repair can save you thousands of dollars in restorative work. The CIPP process is typically less expensive than conventional pipe repair because it doesn’t require a large amount of excavation and doesn’t need to remove landscaping or sidewalks.

CIPP trenchless sewer line replacement is a fast and simple process. The labor costs vary between $75 and $250 per foot, and the materials used to line the pipes vary. PVC is the preferred material, but some plumbers recommend cast iron, which can cost up to four times as much as PVC. You can read more about the differences between PVC and cast iron sewer lines later in this guide. If you have any questions or concerns, call a plumber or an experienced repair professional.

Tree roots can cause damage to your sewer line, so you need to get them removed and replaced. However, this process can cost anywhere from $300 to $20,000 per foot. CIPP trenchless sewer line replacement cost differs from traditional pipe replacement due to the fact that it’s less expensive, and there are fewer inconveniences. The CIPP process is a better choice for homeowners who want to avoid the mess, excavation, and costly clean-up.

While sewer line trenching costs anywhere from $4 to $12 per foot, CIPP trenchless pipe bursting costs anywhere from $60 to $300 per foot. The total cost for a CIPP trenchless sewer line replacement varies depending on the length and diameter of the pipe, how complex the joints are, and the type of materials used. CIPP trenchless sewer line replacement cost depends on many factors specific to your home.

Pipe bursting

The first thing you need to understand is the method of pipe bursting for trenchless sewer line replacement cost. Pipe bursting is a method in which a new pipe is pushed through a damaged one and breaks the old one. This new pipe is then pushed through the soil to make room for the replacement. Pipe bursting can take anywhere from a few hours to a couple of days. If you prefer an easier way to have your old sewer line replaced, you can opt for pipe lining. This method entails inserting an epoxy liner into the old pipe and setting up a new one with a smaller size.

There are two methods for trenchless sewer line replacement cost: pipe bursting and cured in place pipe lining. The former requires more access holes, while the latter costs less. The cost of pipe bursting depends on the length of the sewer line and the number of connecting drains that have to be exposed. A plumber will have to expose any of these drains prior to performing a trenchless pipe replacement.

When it comes to bursting pipes, virtually all types of plastic and metal pipes can be blown apart. While lead pipes are too strong to be blown, bursting might not be the best option. In addition, pipe bursting will not work on 90-degree angles, short water lines, or clogged pipes. In such cases, another method is pipe lining. It is an eco-friendly method that involves no chemicals. In addition to bursting, pipe bursting also allows you to get a better flow rate. The process is permanent, lasting between fifty and a hundred years, which is an excellent value.

In addition to being cheaper than the traditional method, pipe bursting for trenchless sewer line replacement costs are less disruptive. Unlike traditional methods, trenchless sewer repair doesn’t require excavation, which means your new sewer line won’t be visible during the repair process. You can use this method on a limited number of houses. The most common reason why people opt for this method is that it does not cost a lot and is more effective.

The cost of pipe bursting for trenchless sewer line replacement may range from $60 to $300 per foot, but the total cost will depend on the length of the sewer line. In addition to the cost of pipe bursting, you may also need to pay for permits and sidewalk repairs, so be sure to research the cost before choosing the service to perform. There are many things to consider before choosing this method. The price range varies widely.

Pipe bursting for trenchless sewer line replacement may cost more than traditional methods, but it will also save you time and money in the long run. Unlike traditional methods, pipe bursting requires only one or two holes and doesn’t disrupt landscaping or lawn. As long as you have the proper preparation, you should be fine. If you’re concerned about the cost, you can always ask a professional to estimate your project’s final cost.

Trenchless sewer line replacement

A trenchless sewer line replacement can save homeowners between $2,000 and $4,000 depending on the length of the pipe and its materials. Most plumbers recommend PVC pipe, but some use cast iron, which costs up to four times as much as PVC. Below, we’ll discuss the pros and cons of each type of sewer line, and how they differ in price. Regardless of your budget, trenchless sewer line replacement is worth considering if you’re concerned about your home’s plumbing.

Trenchless sewer line replacement is typically done with pipe bursting, which uses a new pipe inserted into an old pipe and then breaking it up. This process typically takes a few hours. Another trenchless sewer line replacement method is pipe lining, which involves inserting an epoxy liner into the old pipe and setting it up for a new, smaller-sized pipe. While trenchless sewer line replacements are not as fast as traditional pipe bursting, they are still relatively inexpensive compared to the labor-intensive methods.

The cost of trenchless sewer line replacement can vary depending on the severity of the problem. If a pipe is back-pitched, collapsed, or cracked, it may need to be dug up. The costs for a trenchless sewer line replacement will include the time required for a thorough inspection, the removal of excess buildup, and the reinstatement of tie-ins. A typical trenchless sewer line replacement costs between $2,500 and $36,000.

Trenchless sewer line replacement can cost between $3,000 and $6,000. The price for a small-sized job can be as low as $300. A large-scale job can cost as much as $20,000. It’s worth noting that trenchless sewer line replacement can be completed in a day, which means less disruption to your home and yard. If your pipes have gotten severely damaged, tree roots may have ruined them.

In general, a 90-foot trenchless sewer line repair costs between $18,000 and $20,000. The work will not interrupt tenants’ plumbing. The rate of trenchless sewer pipe replacement will depend on the length and condition of your existing pipeline. The access to the pipe will affect the cost, as you may have to dig an access hole and use traffic control for a day while the project is underway. However, trenchless repair is less expensive than traditional excavation and installation methods.

A trenchless repair can cost between $60 and $250 per linear foot, depending on the diameter of the pipe, the complexity of the joints, and the length of the sewer line. Depending on your location and pipe diameter, a trenchless repair can range from $4000 to $12000 or more. The cost can be higher or lower, but it’s worth the investment if it can save you money. This is the only way to go if you don’t want to spend more money than necessary.