Skip to Content

What is a Synthetic Emerald?

If you’ve ever been tempted to buy an emerald, but aren’t sure if it’s real, read on to find out more about synthetic emeralds. Their composition and value will be explained in this article. Before you buy one, read up on the characteristics of a good emerald. You may be surprised by what you find.

Synthetic emerald

A synthetic emerald is a gemstone that is manufactured through a process called hydrothermal growth. During this process, a small seed crystal is suspended in a molten solution of water and dissolved elements. The molten solution is heated and pressured to form the gem. This process results in a crystal with similar optical and chemical properties to natural gems, but is far cheaper and easier to produce.

The first three types of synthetic emeralds are distinguished by their refractive indices, which cause the optical boundaries. Under long-wave ultraviolet, these synthetic emeralds show a rim of red fluorescent light. When viewed through a Polariscope, they show a wavy extinction pattern. A third group of synthetic emeralds, called Lechleitner’s emeralds, have refractive indices of 1.570 and 1.574, and a specific gravity of 2.70.

This green gemstone is made from the mineral beryl, which is a silicate of beryllium. These minerals are present in small amounts in the Earth’s crust. It is rare for them to be present in one particular location, making them difficult to identify. They also have distinct color variations. While most natural emeralds contain a green hue, they are characterized by surface-reaching fractures and inclusions. In natural emeralds, chromium and vanadium are present in lesser amounts and provide the gemstone with its green color.

Another type of synthetic emerald is the lab-grown variety. Lab-grown emeralds are often transparent, but a good natural emerald can cost upwards of $100,000 per carat. As with other synthetic gemstones, the size and clarity of a real emerald crystal depends on its size and composition. It may take over a year for an extra-large crystal to form.

Despite the high price of natural emeralds, lab-created gemstones do not have the same value. During the hydrothermal process, the minerals and nutrients are dissolved in water and forced to crystallize. In the end, a synthetic emerald crystallizes on the seed of a natural emerald, such as Beryl. The results of this process are almost identical, and many gemologists can identify most synthetic emeralds easily.

In comparison to natural emerald, lab-grown emeralds are slightly cheaper than natural emeralds. However, they have an inferior appearance and slightly off-color. Some buyers may even notice irregularities in synthetic emeralds and would prefer a different cut. They should also know the color and quality of the natural emeralds they are considering purchasing.

The Portuguese brilliant flower cut is the most popular man-made emerald. It features moderate inclusions and weighs 1.37 ct. It’s priced at $67/ct. In addition to the brilliant star cut, lab-grown emeralds are also available in the heart shape, which has slight inclusions. At a cost of $67 per ct, this gemstone is priced according to its weight.

Their composition

When it comes to Synthetic Emeralds, you should know what makes them so green. They are created with the same process as natural emeralds, but are made using synthetic materials. This article will explain the process behind how synthetic emeralds are created and discuss their composition. Synthetic Emeralds are made from a mixture of silicon, aluminum, and beryllium. The process involves the growth of a seed crystal suspended in a liquid that is a mixture of these substances.

The absorption spectra of the two types of synthetic Emeralds are identical to those of the natural ones, except that the main absorption band has shifted to the long-wave side, hiding a line at 637 nm. This shift accounts for the more bluish-green e-rays that these gemstones produce. Additionally, the absorption band has become narrower and weaker. Unlike natural Emerald, synthetic emeralds have a specific gravity of 2.70.

The most popular gemstones in the world are the emerald and beryl. These two minerals have a common composition, but the emerald is much rarer. Emeralds are made from beryllium, a metal found in trace amounts in Earth’s crust. It is very rare to find beryllium in a single location. Moreover, beryl’s color is derived from trace amounts of vanadium and chromium. Consequently, emeralds are found only in a few places on Earth.

Another method of creating synthetic emeralds is called flux growth. Flux growth involves reducing the melting point of the surrounding material. Once the mixture is mixed with the elements that make up an emerald, it grows into a facetable crystal. Because these gemstones are synthetic, they are much cheaper than natural ones. So, if you’re looking for a beautiful emerald, consider a synthetic.

Natural emeralds have many similarities with synthetic emeralds, but they are more expensive and opaque. The color and clarity of synthetic emeralds are superior to that of natural ones, but the price tag is much lower. Moreover, synthetic emeralds are made in a lab, making them a more affordable alternative. The only major difference between them is their composition and color.

Trapiche emeralds are rare gems that form naturally in Colombia. Production varies depending on the grade and source. From 2000 to 2010, emerald production in Colombia increased 78%. The process of trapiche emerald crystallization creates a rapid crystallization. Trapiche emeralds are distinguished by their ray-like spokes of dark impurities.

Their value

When it comes to natural gemstones, the difference between synthetic and natural emeralds is minimal. Though man-made emeralds are created with similar processes, they have no inherent value. Man-made emeralds are expensive and energy-intensive to produce, but they are chemically and physically identical to their natural counterparts. Because of this, they do not hold the same value as natural emeralds. In addition, they can be created at any time.

Choosing the right type of emerald is vital. While color hue is a strong indicator of the origin of an emerald, it is not a definitive test. Moreover, colors vary widely among different sources. So, when evaluating an emerald, its purity and intensity are key. However, if you have a natural emerald, the same color can be faked as well.

In addition, the clarity of an emerald is important. This is because emeralds have many eye-visible inclusions. Generally, eye-visible inclusions do not reduce the emerald’s value. However, inclusions that negatively affect transparency will decrease the stone’s value. The cut of an emerald can affect the visibility of inclusions, color, and durability. An emerald cut that has a proper cut will maximize visual appeal and value.

Besides being inexpensive, lab-created emeralds are also not as valuable as natural emeralds. In fact, a high-quality synthetic emerald can cost anywhere from $169 to $350 USD per carat. But even with this difference, it is still possible to find inexpensive synthetic emeralds. So what’s the difference? A lot depends on how much you’re willing to spend. If you’re planning to buy a piece of jewelry with an emerald, a good jeweler can tell you about the quality of the emerald.

The history of emeralds is impressive. Ancient Egyptians and Romans both considered it a symbol of eternal youth, and they believed that gazing into an emerald relieved eye strain and stress. Romans also attributed the color to Venus, the goddess of love. Various stories also associate emeralds with mystical powers, so they’re often included in legends. In fact, the year 2013 has been named as the Year of Emeralds.

In addition to their beauty, emeralds can also have flaws. A good way to tell if an emerald is a synthetic is to examine it carefully with a jeweler’s loupe or magnifying glass. If you find a gem that has a pattern in it that looks irregular, it’s most likely a synthetic. In addition, the gem’s edges are defined.

A lab-grown emerald can weigh up to six carats. Despite this, it still has visible inclusions. At the end of the day, a well-cut emerald is a high-quality gemstone. If you are looking to purchase a synthetic emerald, keep in mind that its price will depend on the cut and clarity of the gemstone. However, this does not necessarily mean that they will be as attractive as a real gem.